Trumpf Punch Presses

Download our Trumpf Tooling List here.

We have three CNC punch presses which are programmed using Trumpf's 3D modelling and tool-path software. The Trumpf machines use an integrated linear tool magazine on a rail that accepts pre-aligned tool cartridges. Off-line tool alignment almost eliminates the tool alignment set-up downtime that turret style punch presses inevitably have.

Our newest machine is a TRUMPF 2020R with loader/unloader and multi-tool option (see chart to right).

We also have two TRUMPF TC200Rs which use an integrated linear magazine on a rail running parallel to the x-axis of the machine. There are 17 stations on the rail; however, only 15 stations are used for tooling since each clamp takes up a station. In three of the stations we have 6-tool multi-tools, providing us with an effective total capacity of 30 auto-indexable stations. As a result of the linear magazine tooling rail, tool setup time is reduced dramatically.

The table limit of the TC200R is 80" x 50" without a reposition, which allows us to load full sheets into the machine without an extra shearing operation. The punching capacity of the machine is 20 tons with a maximum sheet thickness of 0.25". Travel speed in the x-axis is 60 m/min, 40 m/min in the y-axis. The machine is capable of a maximum stroke rate of 420 hits per minute.

This is a YouTube Video of the Trumpf Punching Head in action.

For more information you can visit the Trumpf website.