Laser Cutting Machines
We have two lasers, a Mitsubishi system with a tower, and a Trumpf Laser/Punch Combination machine. Our Mitsubishi Laser Processing System has a 16 shelf tower that is capable of holding 96,000 pounds of raw material and programmable over/under unload carts that can handle 22,000 pounds of material before we have to intervene. The system can load, cut and unload 5'x10' sheets of metal, 24 hours a day, 7 days a week largely unattended. The NX is Mitsubishi's fastest laser system using a 4000 watt resonator to drive a flying optics bed. Because the material does not move while being cut, it minimizes scratches and reduces the need for micro-joints often eliminating the need for post processing. For information on this service give our President a call or come in for a free tour.
ML3015NX-40 Machine Specifications
| Processing Machine Specifications | ML3015NX-40 |
|---|---|
| Machine Structure | X-Y Precision Rack & Pinion, Z Precision Linear Drive |
| Travel Drive Method | X-Y-Z Simultaneous 3-axes (Z axis height control is also possible) |
| Max. Workpiece Size (in.) | 120.1 x 60.0 |
| Table Pass Height (in.) | 34.6 |
| Processing Access | Manual Door |
| Pallet Changer | Provided |
| X-Axis Stroke (in.) | 125.9 |
| Y-Axis Stroke (in.) | 62.9 |
| Z-Axis Stroke (in.) | 4.7 |
| Rapid Travel (X,Y) (in./min.) | 4724 (single axis), 6680 (simultaneous) |
| Max Processing Feedrates (in./min.) | 2360 |
| Positioning Precision (in.) | 0.0019/20 (X, Y axis, 0.0039/4 (Z-axis) |
| Repeatability (in.) | ±0.00039 (X, Y axis) |
| Drive Motor Type | Intelligent Smart Serve |
| Max Workpiece Weight (lb.) | 2050 |
| Machine Unit Dimmensions (WxDxH) (in.) | 440.4 x 94.5 x 190.3 |
| Machine System Weight (lb.) | (40CF-R) 33,070 |
| Installation Dimmensions (WxD) (in.) | 491.3 x 346.9 |
| Floor Space Req. (sq. ft.) | 1184 |
| Machine Power Requirements | 71 KVA 30 208 VAC ± 5% 60 Hz 202 Full Load AMPS |
| Additional Features | 4000W configuration Agile Z-axis with arc evade and high-speed height sensor for top-speed cutting New structural configuration handles forces up to 4 Gs in Z-axis and 2 Gs in X- and Y-axes Diamond-Path Technology™ provides beam stability at speeds up to 2,360 inches per minute High-reflection, low-distortion mirrors One-piece cast frame M700 Control touch screen with NANO technology CF-R unique resonator Windows® XP operating system Full side covers provide greater safety |
4000 Watt Laser Cutting Capability
| Material | Assist Gas | Rating (1) | Maximum Thickness (2) | Accuracy (Rating) | Accuracy (Maximum) |
|---|---|---|---|---|---|
| Mild Steel | Oxygen | 1.0" (25.0mm) | 1.0" (25.0mm) | +/- .005" | +/-.002" |
| Mild Steel | Nitrogen | .25" (6.3mm) | .25" (6.3mm) | +/- .005" | +/-.002" |
| Stainless Steel | Nitrogen | .375" (9.5mm) | .75" (19.0mm) | +/- .005" | +/-.002" |
| Aluminum | Nitrogen | .375" (9.5mm) | .5" (12.7mm) | +/- .005" | +/-.002" |
| (1) Rating: we can cut this thickness continuously in an operational environment in full automation mode, 24 hours a day. (2) Maximum thickness: we can cut this thickness with an operator watching for overheating, edge quality, burr quality. Our success depends on the part geometry, material composition and desired finish. |
|||||